Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Gateways connect a system (a satellite or ground station) to Major Tom using Major Tom's WebSocket-based Gateway API.

New to Major Tom?

We recommend running our Example Python Gateway locally to get started!
It's intended to give you a feel for how to interact with satellites from Major Tom and give an example of how to use the API documented below.
No coding is required to use it! Just follow the README instructions in the repository.

Gateways in Major Tom

Major Tom's concept of a Gateway is simply a named channel of communication. Gateways have a token that is used to authenticate with Major Tom. Setup a Gateway on your Mission and copy the token.

  • Gateways are just named communication channels with authentication.

  • If you want to have dev and prod environments, make two Gateways.

Connecting to Major Tom

  1. Open a WebSocket connection to Major Tom at /gateway_api/v1.0 (this probably looks like: wss://

  2. Include the X-Gateway-Token HTTP header or gateway_token query param, set to a token from one of your Major Tom Gateways.

  3. Provide Basic Auth credentials for your Major Tom deployment. If your websocket client supports it, you may be able to include these in the connection string (e.g. wss:// Alternatively, your websocket client may allow you to provide the username and password as options. If not, you can do it yourself by encoding them in the HTTP Authorization header. See information on correct encoding.

  4. You should receive a message like {'type': 'hello', 'hello': { 'mission': 'your-mission' }} on connection if your X-Gateway-Token header (or gateway_token param) and Authorization header are valid.

Response Codes

  • 401 - If the server requires Basic Auth credentials and you haven't provided them, you will receive a 401 error.

  • 403 - If the Gateway Token is invalid, you will receive a 403 error.

  • 404 or 503 - If the Major Tom service is temporarily unavailable, you may receive a 404 or 503 error. You should wait a few seconds and try again.

Rate Limits


For message details, see rate_limit

General implementation advice

  • In order to be forward compatible, ignore messages and message fields that you don't understand.

  • Reconnect on disconnection after a short delay.

  • Buffer telemetry, events, and command updates until successful reconnection.

  • Dual-write any critical telemetry & events to local log files for redundancy.

Interactive Testing

You can issue test messages against this Gateway <a href="./tester">here</a>. Warning: this is a live connection to your Gateway!

File Transfer in Major Tom

There are examples of uplink and downlink flows, and suggestions of how to use the API to accomplish file transfers, in the
<a href="#file_transfer">file transfer section</a>. The examples assume knowledge of how Commands interact with a Gateway.

Messages from Major Tom

A Gateway will receive the following message types from Major Tom:

<li><a href="#command">command</a></li>
<li><a href="#cancel">cancel</a></li>
<li><a href="#rate_limit">rate_limit</a></li>
<li><a href="#error">error</a></li>

Messages to Major Tom

A Gateway can send the following message types to Major Tom:

<li><a href="#command">command_update</a></li>
<li><a href="#measurements">measurements</a></li>
<li><a href="#event">event</a></li>
<li><a href="#command_definitions_update">command_definitions_update</a></li>
<li><a href="#file_list">file_list</a></li>
<li><a href="#file_metadata_update">file_metadata_update</a></li>

Other API actions

Some flows occur over a RESTful API:

<li><a href="#file_upload">file_upload</a></li>
<li><a href="#file_download">file_download</a></li>

<a name="command"></a>


A command from Major Tom represents a user's action to create and queue a Command based on a CommandDefinition.

  "type": "command",
  "command": {
    "id": 20,
    "type": "PowerUp",
    "system": "hamilton",
    "fields": [
      { "name": "parameter-1", "value": 1 },
      { "name": "parameter-2", "value": "foo" }

Updating Commands

Note: Major Tom previously updated commands using a command_status message. This is (currently) still supported, but
we recommend upgrading to the new command_update message, detailed here.

Setting Command state

Commands in Major Tom transition through a series of states based on messages sent by your Gateway. The current state of a
command is displayed in the Major Tom UI along with the command's payload representation, current status, progress bars,
final output, and any errors that you report. It is up to you and your Gateway how you use these fields and the
available states, which are:

  • queued (reserved for Major Tom)

  • waiting_for_gateway (reserved for Major Tom)

  • sent_to_gateway (reserved for Major Tom)

  • preparing_on_gateway

  • uplinking_to_system

  • transmitted_to_system

  • acked_by_system

  • executing_on_system

  • downlinking_from_system

  • processing_on_gateway

  • cancelled

  • completed

  • failed

The job of your Gateway is to transition a Command through the most appropriate series of these states. All states are
optional. You can update a command's state by sending the original Command's field as id, like so:

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "acked_by_system"
Validating the Command

When you first receive a Command, you should validate that the Command's fields are valid and correctly formatted for
your system given the command's type. If there is a validation error, your Gateway should transition the Command to
the failed state and provide one or more errors. For example:

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "failed",
    "errors": ["parameter-2 must be longer than 5 characters", "PowerUp is invalid in the current run level"]
Providing a Command payload & status

If the Command is valid, you will likely want to transition to preparing_on_gateway or uplinking_to_system,
whichever is appropriate for your Command lifecycle. At the same time, we recommend that you provide a payload
containing the domain-specific command representation that will be sent to your remote system. E.g., a HEX code or JSON
blob. This is optional, but if provided, Major Tom will show it in the UI for future debugging.

You may also choose to provide an optional status for the Command. This field will be cleared whenever the command
changes state. It is shown in the UI to the operator and saved as an event. You can take advantage of status
to help illuminate what is happening with the Command as it moves through its lifecycle.

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "uplinking_to_system",
    "status": "Waiting for pass",
    "payload": "mutation { powerUp { success, errors, pid } }"
Update your Command fields as often as needed

When updating payload, errors, status, and the progress and output fields explained below, you do not have to
also provide state, although you can. You can provide any combination of these fields in a command_update message,
allowing you to repeatedly update the Major Tom UI when inside of a state.

To ensure correct Command update ordering, Commands are updated directly by the Gateway thread in Major Tom, so you should avoid updating Commands faster than an average of a few times per second or the Gateway can back up.

This is particularly important for statuses and progress bars (outlined below) where you should be sure to avoid sending repeated updates for some common event, such as on every byte received or fractional percent complete

Completing or failing your Command

When your Command completes, you should move it into the completed state and provide an optional output field for
the operator.

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "completed",
    "output": "Power enabled"

On the other hand, if the Command fails on the remote system (or anywhere in its lifecycle), you should move it into
the failed state and provide errors and possibly a status:

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "failed",
    "status": "Command failed on satellite",
    "errors": ["Error code 123"]

Note that output and errors can only be set in the completed and failed states, as they're intended to represent
the final results of a Command.

Progress bars

Finally, in any of the ing progress states (e.g., preparing_on_gateway, uplinking_to_system, executing_on_system,
downlinking_from_system, and processing_on_gateway), Major Tom can display progress bars to provide visual feedback
to the operator. A progress bar will be displayed in a progress state when you provide progress_1_current,
progress_1_max, and (optionally) progress_1_label. Example usage would be to show progress of an analysis step on
your Gateway or of queue state on a remote system.

Additionally, you may display a second progress bar by providing progress_2_current, progress_2_max, and
(optionally) progress_2_label. This may be helpful if you want to display progress of a substep or dependent value.
For example, when uplinking, you could display transmitted chunks with progress 1 and ACKed chunks with progress 2.

  "type": "command_update",
  "command": {
    "id": 20,
    "state": "preparing_on_gateway",
    "status": "Compressing",
    "progress_1_current": 5,
    "progress_1_max": 100,
    "progress_1_label": "percent compressed"

In summary, the following fields can be set on commands:



Available in States

Cleared on State Transition

Suggested Usage


string enum



Indicate phase of command lifecycle





Record command payload representation for future debugging





Display what is currently happening with the command



completed or failed


Final command output


array of strings

completed or failed


Final command errors



Progress states (those containing ing)


Current value of a process to display as a progress bar



Progress states (those containing ing)


Max value of a process to display as a progress bar



Progress states (those containing ing)


Label for the progress bar (e.g., "bytes uplinked")



Progress states (those containing ing)


Current value of a secondary process to display as a second progress bar



Progress states (those containing ing)


Max value of a secondary process to display as a second progress bar



Progress states (those containing ing)


Label for the second progress bar (e.g., "chunks ACKed")

<a name="cancel"></a>

Command Cancellation

If a user requests command cancellation, Major Tom will send the Gateway a cancel message of the following form:

  "type": "cancel",
  "timestamp": 1528391020767,
  "command": {
    "id": 20

It is the responsibility of the Gateway to transition the command into the cancelled state.

<a name="rate_limit"></a>

Rate Limit

There is a maximum allowed Gateway messaging rate. If you exceed this rate, Major Tom will ignore your message

and send a message of type: "rate_limit" with a "rate_limit" field containing information.

    "type": "rate_limit",
    "rate_limit": {
        "rate": 60,
        "retry_after": 0.5,
        "error": "Rate limit exceeded. Please limit request rate to a burst of 20 and an average of 60/second.",

rate is the average number of requests per minute that will be accepted, and retry_after is the number of seconds

until the next message will be accepted.

<a name="error"></a>


If Major Tom needs to send your gateway an error, you'll receive a message of type: "error" with an error field indicating the cause.

You should generally log this error.

Some errors (those with "disconnect": "true") will also result in Major Tom disconnecting your Gateway.

  "type": "error",
  "error": "This Gateway's token has been rotated. Please use the new one.",
  "disconnect": true

Sending data to Major Tom

<a name="measurements"></a>

Sending Measurements to Major Tom

To send measurements to Major Tom, send messages of the form:

  "type": "measurements",
  "measurements": [
      "system": "hamilton",
      "subsystem": "eps",
      "metric": "voltage",
      "value": 10,
      "timestamp": 1528391020767
    { ... }
  • The system field must be the name of a system (Satellite or Ground Station) on this Mission.

  • The subsystem field must be the name of a Subsystem on the given System. It will be created automatically if it doesn’t yet exist.

  • The metric field must be the name of a Metric on the given Subsystem. It will be created automatically if it doesn't yet exist.

  • The value field currently only supports ints and floats.

  • The timestamp field is UTC in milliseconds. It is optional, and if left unset, it will default to the time Major Tom processes the measurements. We recommend including this field.

Please note: it is significantly more performant to send Major Tom batches of telemetry in a single "type": "measurements" message instead of via many separate messages. You may send up to 10,000 measurements per measurements messages.

<a name="event"></a>

Sending events to Major Tom

To send events to Major Tom, send messages of the form:

  "type": "event",
  "event": {
    "system": "hamilton",
    "type": "SatelliteAlert",
    "message": "Reactor is critical",
    "level": "error",
    "command_id": 123,
    "debug": { "some_key": "some_value" },
    "timestamp": 1528391020767
  • system - (optional) the name of a system (Satellite or Ground Station) on this Mission

  • type - (optional) a custom type for this Event, defaults to Event. You will likely use this type to select a subset of events in the UI and in future scripts. We recommend CamelCase or equivalent.

  • message - the text of the Event

  • level - (optional) one of debug, nominal (the default), warning, error, or critical

  • command_id (optional) - the ID of a Command associated with this Event

  • debug (optional) - arbitrary JSON key-value metadata

  • timestamp (optional) - when this Event was generated in milliseconds UTC. Excluding it defaults to the time Major Tom receives the message.

We recommend limiting your logging to important events only. Events that are submitted at the debug level are dropped after 2 weeks.

<a name="command_definitions_update"></a>

Updating the Command Definitions for a System

Given the name of a System (Satellite or GroundStation), you can update its Command Definitions via a message sent over

the Gateway websocket API:

  "type": "command_definitions_update",
  "command_definitions": {
    "system": "hamilton",
    "definitions": {
      "set_power": {
        "display_name": "Set Power",
        "description": "Set system power on the Example Rust Service",
        "fields": [
          {"name": "power", "type": "number", "range": [0, 1]}
      "calibrate_thermometer": {
        "display_name": "Calibrate Thermometer",
        "description": "Calibrate the thermometer on the Example Rust Service",
        "fields": []

As with a Command Definition upload in the Major Tom UI, the uploaded Command Definitions will completely replace the existing ones for the given System.

<a name="file_list"></a>

Updating the File List for a System

Major Tom can display a list of remote files for downlink under each top-level System. The list for each system is

updated en masse over the Gateway API.

To replace the full file list of a System with a full new file list, send a message of the form:

  "type": "file_list",
  "file_list": {
    "system": "hamilton",
    "timestamp": 1528391020767,
    "files": [
        "name": "earth.tiff",
        "size": 1231040,
        "timestamp": 1528391000000,
        "metadata": { "type": "image", "lat": 40.730610, "lng": -73.935242 }
  • The system (required) -- must be the name of a system (Satellite or Ground Station) on this Mission.

  • The timestamp (optional) -- a UNIX epoch in milliseconds UTC. It is intended to represent the time that the file list was generated on the System.

  • The files (required) -- must be an array of objects, each with the following fields:

    • name (required) -- this can be the file path on disk or some other unique identifier for the file. This is what will be passed to your Gateway when a downlink is requested.

    • size (required) -- this is the size of the file in bytes.

    • timestamp (required) -- a UNIX epoch in milliseconds UTC that can represent the mtime or ctime of the file, or some other relevant timestamp. It will be displayed in the Major Tom UI.

    • metadata (optional) -- any key/value pairs provided will be shown for informational purposes in the Major Tom UI.

If you provide a Command Definition called update_file_list, for convenience Major Tom will provide a button in the File List UI that you can press to trigger that command.

<a name="file_metadata_update"></a>

Updating the metadata of a DownlinkedFile

Given the id of a DownlinkedFile (see the previous section), you can update the JSON string key-value pairs

associated with that file whenever you like using a message sent over the Gateway websocket API:

  "type": "file_metadata_update",
  "downlinked_file": {
    "id": "29",
    "metadata": { "location": "32.7767 N, 96.7970 W", "analyzed": "true" }

Note that the new metadata will be merged with the existing metadata. If you wish to delete a field, you must send

a null value for it.

<a name="file_transfer"></a>

File Transfer in Major Tom

Major Tom serves as an interface for interacting with the file transfer system that works with your remote system

and does not directly manage the protocol required for your remote system. Through Major Tom, you can send commands to trigger

the start of a file transfer, see progress updates for the status of that transfer, interact with files that have been

downlinked, and stage files to be uplinked. The handling of the space - ground connection and the file transfer itself must be

done by the Gateway, and the Gateway is responsible for telling Major Tom about the progress, downloading files from Major

Tom that need to be uplinked, and uploading files to Major Tom that have been downlinked.

Note on terminology: "Uplink" and "Downlink" refers to the space - ground portion of the file transfer, while "Upload" and

"Download" refer to interaction with Major Tom.

Example Flows

Uplink a file to the satellite/system:


<li>User uploads a file under the "Uplink" tab under the desired system. This stages the file so it's accessible by the Gateway.</li>

<li>User sends a command to start the file uplink with a field that contains the reference to the staged file for the Gateway. See command definition documentation under the settings tab for your system for how to streamline this process.</li>

<li>The Gateway receives the command, updates the command state to "preparing_on_gateway", and <a href="#file_download">downloads</a> the staged file from Major Tom.</li>

<li>The Gateway begins uplinking the file to the system, setting command state to "uplinking_to_system" and issuing command_update messages as needed to represent progress.</li>

<li>The Gateway either confirms the file was transferred successfully by setting the command state to "complete" or lists any errors that occurred by setting the command state to "failed" and submitting the errors. </li>


Downlink a file from the satellite/system:


<li>(Optional) The Gateway uploads a <a href="#file_list">file_list</a> which represents the files on the system that are available for downlinking. </li>

<li>The user issues a command to the Gateway to start the transfer process with the filename/indicator required to reference the appropriate file. See command definition documentation under the settings tab for your system for how to streamline this process. </li>

<li>The Gateway receives the command, updates the command state to "transmitted_to_system", and sends the appropriate command to the system to trigger the file downlink process. </li>

<li>Once the downlink has started, the Gateway updates the command state to "downlinking_from_system", and issues command update messages as appropriate to represent progress. </li>

<li>Once the downlink has finished, the Gateway updates the command state to "processing_on_gateway" and <a href="#file_upload">uploads the file</a> to Major Tom.</li>

<li>(Optional) The Gateway can <a href="#file_metadata_update">update the file metadata</a> as appropriate, now or in the future.</li>

<li>The Gateway sets the command state to "completed". </li>

<li>The user can view or download the file from the Downlinked tab on the Files page, accessible via the icon on the sidebar.</li>


<a name="file_upload"></a>

Uploading DownlinkedFiles to Major Tom

In the Major Tom UI, under the appropriate System, you can view the contents of the latest File List in the Downlink tab.

Here, you can copy a filename for any file, or Major Tom can pre-fill that filename into a Command Definition called

downlink_file, if you have provided one. Given this filename, your Gateway should downlink the associated file from the remote system.

Once a file has been downlinked from your remote system to your Gateway, you can upload it to Major Tom for display in the UI and for eventual download to users' computers.

The upload flow is different from the other Gateway API actions because it does not use the Gateway Websocket API.

Instead, upload is performed via a series of RESTful API requests.

We will now walk through the process. We recommend following along using

this bash script that demonstrates the flow via


Step 1: Request permission to upload a file

Make a JSON POST request to /rails/active_storage/direct_uploads including your Gateway token in the X-Gateway-Token

header and the following required parameters:

  • filename - the name the file should have on disk when downloaded to a user's computer (not the full path)

  • byte_size - The size of the file in bytes (cat file | wc -c)

  • content_type - The MIME type that the file should have when downloaded. For images that may be previewed in Major Tom,

please provide the correct MIME type, such as image/jpeg or image/png. For other file types, binary/octet-stream

should be fine.

  • checksum - A base64 encoded MD5 of the file's contents. Please see

this snippet for some examples of computing this.

An example with curl:

curl "<"> \
  -H "X-Gateway-Token: YOUR_GATEWAY_TOKEN" \
  -H "Content-Type: application/json" \
  --data-binary '{"filename":"file.txt","byte_size":123,"content_type":"binary/octet-stream","checksum":"CHECKSUM"}'

The response will look something like this:

  "signed_id": "...eyJfcmiOnsibWVzc2Fn--91b3da29d1eb12f4e...",
  "direct_upload": {
    "url": "<http://THE-LONG-UPLOAD-URL",>
    "headers": {
      "Content-Type": "binary/octet-stream",
      "Content-MD5": "CHECKSUM"

You will need these fields in the next two steps.

Step 2: Upload the file with a PUT request

Make an HTTP PUT request to the URL provided in the direct_upload.url field in the response from the previous step.

Include the exact request headers provided in the direct_upload.headers fields from the previous step. The file can

be up to 2GB in size.

With curl, this looks like:

curl \
  -H 'Content-Type: binary/octet-stream' \
  -H "Content-MD5: CHECKSUM" \
  --upload-file "file.txt" \

Step 3: Tell Major Tom about the file's details

When the upload has completed successfully, tell Major Tom about the System, remote timestamp, name, and optional

metadata of the file. Make a JSON POST request to /gateway_api/v1.0/downlinked_files including your Gateway token

in the X-Gateway-Token header and the following parameters:

  • signed_id - The long unique ID that was returned in Step 1.

  • name - The full name of the file on the remote system (can be a filename or a full path).

  • timestamp - The timestamp used to sort DownlinkedFiles in Major Tom's UI. (We suggest using the time that you received the downlinked file.)

  • system - The name of the System in Major Tom.

  • command_id - (optional) The Major Tom Command ID that triggered this file downlink.

  • metadata - (optional) Arbitrary JSON string key-value pairs to display with the DownlinkedFile in the Major Tom UI.

An example with curl:

curl "<"> \
  -H "X-Gateway-Token: YOUR_GATEWAY_TOKEN" \
  -H "Content-Type: application/json" \
  --data-binary '{"signed_id":"THE-SIGNED-ID-FROM-STEP-1",
                  "metadata":{"location":"32.7767 N, 96.7970 W"}

If this requests succeeds, your file has been uploaded and recorded in Major Tom.

An example response:

  "id": 29,
  "name": "file.txt",

Note the returned id, as you may want to use it to issue file metadata updates later.

Again, we recommend reviewing this bash script for

an example of this complete upload flow using curl.

<a name="file_download"></a>

Downloading StagedFiles from Major Tom

In order to uplink files from Major Tom to your remote system, a user will upload files from their web browser to

Major Tom. These files can be up to 2GB in size. Once uploaded, these "StagedFiles" are visible under the System to

which they have been associated. To uplink these files to your remote system, you need to download them from Major Tom

to your Gateway, then uplink via your satellite/system's file transfer protocol. In the Major Tom UI you can copy a

gateway_download_path for any StagedFile. Major Tom will also pre-fill this path into a Command Definition called

uplink_file, if you provide one.

The gateway_download_path will look something like /rails/active_storage/blobs/eyJfcmF.../file.dat?disposition=attachment.

Prepend your Major Tom hostname (including Basic Auth credentials, if needed) to form a complete URL and fetch the file

by issuing an HTTP GET request to the combined URL, including your Gateway Token in an X-Gateway-Token header. Note:

you must follow HTTP redirects for this to work.

An example with curl (using -L to follow redirects):

curl -L \
     -H "X-Gateway-Token: YOUR_GATEWAY_TOKEN" \
  • No labels